EPS Foam Densifier | Sryrofoam Compactor Machine

Уплотнитель пенопласта EPS is also known as the EPS briquetting machine and styrofoam compactor, used for compressing foam, such as EPS or EPE foam plastics. The working principle is to compress the EPS foam into dense blocks by means of a screw compression mechanism. According to the characteristics of raw materials, the compression ratio can be up to 40 times, so as to reduce the volume of foam. The compressed foam blocks are convenient for long-distance transportation and storage, which save transportation cost and storage space. In addition to the styrofoam compactor, we also provide машина для плавления пеныs сократить объемы отходов пенопласта EPS или EPE.

Уплотнитель пенополистирола

• После сжатия пенополистирола объем пенополистирола в 30-40 раз меньший, чем раньше, плотность пенопласта большая, и пеноблоки легко отрезаются, хранятся и перерабатываются. Экономия места для хранения и затрат на транспортировку и хранение.
• The styrofoam compactor is equipped with a pre-crushing mechanism to ensure working efficiency and maintain low energy consumption. Different sizes of feeding ports can be selected for cold pressing treatment.
• Большие модели могут работать синхронно с конвейерной лентой, что повышает эффективность производства.

Как работает уплотнитель EPS?

EPS foam cold compactor compresses foam plastics according to the principle of screw rotation and cold compress. In operation, the operator just needs to throw the waste foam into the hopper, and the EPS foam densifier has a shredding mechanism to crush the foam block. Then the screw mechanism compresses the small styrofoam/polystyrene foam into a cubic compression block. There is a pressure-regulating device at the front end of the compression section to adjust the compression ratio. After the material is processed by the screw mechanism, the square foam compressing block is formed. Great reduction of the foam volume is conducive to foam recycling.

Two types of styrofoam cold compactor

Мы предлагаем два вида уплотнителей пенополистирола для удовлетворения различных потребностей клиентов.

1. Вертикальный тип

The feeding port of a vertical styrofoam compactor machine is on the upper part of the machine, which needs to lift the raw materials to the height.

Specification (vertical type compactor)

 2. Горизонтальный тип

The height of the feeding port of a horizontal styrofoam compactor is flush with the ground, which is more convenient for feeding.

Спецификация (горизонтальный тип)